your location:Home > News Center > News

Time: 2020-10-27 08:54:23Source: Ever -Power Group

Information summary:

Installation instructions for the commutator of the spiral bevel gear! !Do you know what problems should be paid attention to when installing spiral bevel gears?So, today, we will give you a brief introduction. 1. Precautions before installation: a. The installation shaft should be cleaned before use.And check whether the installation shaft is bruised,...

Spiral bevel gearInstallation instructions for the commutator! !

Do you know what problems should be paid attention to when installing spiral bevel gears?So, today, we will give you a brief introduction.

1. Precautions before installation:

a. The installation shaft of the machine should be cleaned before use.And check whether the installation shaft has bruises and dirt, if any, all should be removed.

b. The operating temperature of the commutator is 0~40℃.

c. Check whether the matching size of the hole connected with the commutator meets the requirements, and the hole tolerance should be H7.

d. Before use, replace the blockage at the high position with an exhaust plug to ensure that the body gas is discharged when the commutator is running.

2. Installation of commutator:

a. The commutator can only be installed on a flat, shock-absorbing and torsion resistant support structure.

b. Under any circumstances, it is not allowed to knock belt pulleys, couplings, pinions or sprockets into the output shaft with a hammer, as this will damage the bearings and shaft.

3. Use and maintenance:

a. After the commutator is installed, check whether it is flexible.For formal use, no-load test must be carried out. Under normal operation, load and run gradually.

b. The commutator is strictly prohibited to exceed the rated load.

c. Check whether the oil level of the commutator is normal before use and during work.

Spiral bevel gear

keyword:Spiral bevel gear

Article Source:https://spiral-gear.com


Hot product recommendation
Hot News
City Distribution