your location:Home > News Center > Press Room

Time: 2020-10-29 08:56:59Source: Ever -Power Group

Information summary:

Simple analysis of the shot peening strength of spiral bevel gears. Spiral bevel gears, namely spiral bevel gears, are often used for movement and power transmission between two intersecting shafts.The teeth of the bevel gear are distributed on the surface of a cone, and the tooth profile gradually decreases from the large end to the small end.Spiral bevel gears have high transmission efficiency, stable transmission ratio, arc overlapping system...

Simple AnalysisSpiral bevel gearPeening strength

Spiral bevel gears, namely spiral bevel gears, are often used for movement and power transmission between two intersecting shafts.The teeth of the bevel gear are distributed on the surface of a cone, and the tooth profile gradually decreases from the large end to the small end.

Spiral bevel gears have high transmission efficiency, stable transmission ratio, large arc overlap coefficient, high carrying capacity, stable and smooth transmission, reliable operation, compact structure, energy saving and material saving, space saving, wear resistance, long life and low noise.

In various mechanical transmissions, the transmission efficiency of spiral bevel gears is high, which has great economic benefits for various transmissions, especially high-power transmissions; the transmission pair of transmission parts required to transmit the same torque is less space-saving than belts. The space required for chain transmission is small; the spiral bevel gear has a stable transmission ratio, which is often the basic requirement for transmission performance in the transmission of various mechanical equipment; the spiral bevel gear is reliable and has a long life.

Shot peening strength of spiral bevel gear:

The arc height measurement method is usually used to determine the value. The main point is to use a certain spring steel test piece to reflect the shot peening effect by detecting the shape change after the shot peening strength.The specific operation is to fix the Almen test piece (the arc height test piece, the general hardness is 44-50HRC) on the fixture, and then remove the test piece after projecting shot peening, and then measure the height of the curved arc with a gage.

Spiral bevel gear

keyword:Spiral bevel gear

Article Source:https://spiral-gear.com


Hot product recommendation
Hot News
City Distribution