Product Description
Agricultural Machinery Peanut Harvester Mounted on Tractor
Product Description
Tractor Peanut Harvester
1.Sealed cab,reduce the noise, make driver feel more comfortable.
2.Using centrifugal fan to feed grass, has good separation effect, and get cleaner forage.
3.The air current throwing mode is adopted for soil block cleaning,it prevents clogging and reduce the rate of broken peanut.
4.The machine has 2 tanks, 1 tank for the peanut, the other tank for the peanut stalk which will be crushed as forage.
5.Removing dust downward,reduce the dust to extend the working life.
6.The picker uses a double track to run smoothly,adopts the circulation mode picking device,improve picking efficiency.
7.The picker height ,roller speed and fan are visual by digital display.
8.Famous brand engine,optional 120/130/140hp, more powerful, more economical, more energy-saving, and more environment protection.
9.It adopts D3.5 type large clutch gearbox,which is reliable and durable.It has long clutch arm to save energy.
10.Rotary dust cover device to avoid water tank will be high temperature after long time working.
11.Bigger fuel tank;the endurance is longer.Optimize the dydraulic system of the whole machine with high reliability.
Tractor Peanut Harvester
Self-propelled peanut picking and harvesting machine | |||
Product model | 4HJL-2.5 | 4HJL-2.5S | |
model | H 2.5 | H 2.5S | |
power (kw/hp) | 110/150 | 110/150 | |
Engine position | Bias | Bias | |
Pick up width (mm) | 2500 | 2500 | |
Dimensions (mm) | 6725× 2790 ×3420 | 6725× 2790 ×3420 | |
Total Weight( kg) | 5250 | 5250 | |
productivity (hm2/h) | 0.27~0.54 | 0.27~0.54 | |
Picking form / quantity | Longitudinal axial flow cutter teeth | Longitudinal axial flow cutter teeth | |
Dimensions of peanut picking roller (mm) | Φ710×2000 | Φ710×2000 | |
Grain tank capacity (m³) | 2.35 | 2.35 | |
Rear brake | Standard | / | |
Four-wheel drive | / | Standard | |
Optional | Engine configuration | Standard Changchai 152 horsepower engine | Standard Changchai 152 horsepower engine |
Optional CZPT 110kw/150hp engine plus usd470 | Optional CZPT 110kw/150hp engine plus usd470 | ||
Optional Quanchai 110kw/150hp without price increase | Optional Quanchai 110kw/150hp without price increase | ||
Closed side subtraction | Optional closed side reduction, an increase of usd470 | Standard | |
Dust suppression device | undetermined | undetermined |
Tractor Peanut Harvester
Spares Parts
Spares Parts Photos Tractor Peanut Harvester
Price Of Peanut Combine Harvester
Product Details of Tractor Peanut Harvester
Certifications
Our company used advanced OEM operating model ,and owns perfect harvester parts outsourcing system and sales service network.The company has more than 300 sales service sits and 150 outsourcing factories across the country.
Corporate Honors of Tractor Peanut Harvester
High-Tech Enterprise | Science and Technology Enterprises of ZheJiang Province |
Provincial Technology Center | Municipal Enterprise Technology Center |
Wheat Combine Harvester Technology Center | 3.15 Quality Assurance Alliance |
AA Enterprise Credit Evaluation | 2017 Most Influential Brand In Agricultural Machinery Industry |
Agricultural Industrialization Leading Enterprises | E-commerce Leading Enterprises |
Outstanding Private Enterprise | Provincial Leading Enterprise Of Scientific And Technological Innovation |
Provincial High Quality Products | Quality Assurance & Best-selling Brand |
Quality Management Advanced Enterprise | Leading Enterprise In Mechanized Agriculture &Horticulture Equipment Manufacturing |
Customer Satisfaction Top 10 Brands | Top 10 Technology Innovation Enterprises |
Company Profile
HangZhou CZPT Harvest Machinery Co., Ltd is a professional combine harvester manufacturing company which integrates product research,spare parts producing ,complete machine assembling and product after-sale service. The company was founded in 1995.The company products has 7 series and in total more than 100 types which cover peanut harvester,wheat harvester,rice harvester,corn harvester ,soybean harvester ,corn seeds harvester and silage harvester.In international market,the products mainly are exported to South Asia,Southeast Asia,West Asia,Africe and Middle Europe.
After Sales Service
1.Training how to install and use the machine,engineers available to service machinery overseas.
2.Warranty period of 1 year since machine arrives destination port. Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer. Other malfunctions which caused by operation mistakes, man-made problems, etc will be responsible for clients-self.
3. Timely response to customers’ problems 7*24 hours, provide in time Feedback tracking and after-sales services to maximize the customer’s satisfactory.
FAQ
Q1.How long is the delivery date?
A:In general, we can ship the goods within 15 days after receiving your payment. Of course, it also depends on your quantity.
Q2. How can I visit your factory?
A:We are located in HangZhou city,middle of China,Airport&High-speed train, the transportation is very convenient
Q3: What’s your main products?
A: Our products are covered rice&wheat combine harvester,corn harvester and peanut harvester.
Q4. What is your terms of payment?
A: T/T, L/C, Paypal,Western Union
Q 5: How is the quality of the harvesrter?
A : We are an experienced manufacturer which has been in this field for 30 more years, and can supply high quality harvesters for you.
Type: | Vertical Cut Harvester |
---|---|
Power Source: | Diesel |
Harvest method: | Picking |
Drive Type: | Gear Drive |
Transmission: | Soft Shaft |
Certification: | ISO9001:2008, CE |
Customization: |
Available
| Customized Request |
---|
Benefits and Uses of Miter Gears
If you’ve ever looked into the differences between miter gears, you’re probably wondering how to choose between a Straight toothed and Hypoid one. Before you decide, however, make sure you know about backlash and what it means. Backlash is the difference between the addendum and dedendum, and it prevents jamming of the gears, protects the mating gear surfaces, and allows for thermal expansion during operation.
Spiral bevel gears
Spiral bevel gears are designed to increase efficiency and reduce cost. The spiral shape creates a profile in which the teeth are cut with a slight curve along their length, making them an excellent choice for heavy-duty applications. Spiral bevel gears are also hypoid gears, with no offsets. Their smaller size means that they are more compact than other types of right-angle gears, and they are much quieter than other types of gear.
Spiral bevel gears feature helical teeth arranged in a 90-degree angle. The design features a slight curve to the teeth, which reduces backlash while increasing flexibility. Because they have no offsets, they won’t slip during operation. Spiral bevel gears also have less backlash, making them an excellent choice for high-speed applications. They are also carefully spaced to distribute lubricant over a larger area. They are also very accurate and have a locknut design that prevents them from moving out of alignment.
In addition to the geometric design of bevel gears, CZPT can produce 3D models of spiral bevel gears. This software has gained widespread attention from many companies around the world. In fact, CZPT, a major manufacturer of 5-axis milling machines, recently machined a prototype using a spiral bevel gear model. These results prove that spiral bevel gears can be used in a variety of applications, ranging from precision machining to industrial automation.
Spiral bevel gears are also commonly known as hypoid gears. Hypoid gears differ from spiral bevel gears in that their pitch surface is not at the center of the meshing gear. The benefit of this gear design is that it can handle large loads while maintaining its unique features. They also produce less heat than their bevel counterparts, which can affect the efficiency of nearby components.
Straight toothed miter gears
Miter gears are bevel gears that have a pitch angle of 90 degrees. Their gear ratio is 1:1. Miter gears come in straight and spiral tooth varieties and are available in both commercial and high precision grades. They are a versatile tool for any mechanical application. Below are some benefits and uses of miter gears. A simple explanation of the basic principle of this gear type is given. Read on for more details.
When selecting a miter gear, it is important to choose the right material. Hard faced, high carbon steel is appropriate for applications requiring high load, while nylon and injection molding resins are suitable for lower loads. If a particular gear becomes damaged, it’s advisable to replace the entire set, as they are closely linked in shape. The same goes for spiral-cut miter gears. These geared products should be replaced together for proper operation.
Straight bevel gears are the easiest to manufacture. The earliest method was using an indexing head on a planer. Modern manufacturing methods, such as the Revacycle and Coniflex systems, made the process more efficient. CZPT utilizes these newer manufacturing methods and patented them. However, the traditional straight bevel is still the most common and widely used type. It is the simplest to manufacture and is the cheapest type.
SDP/Si is a popular supplier of high-precision gears. The company produces custom miter gears, as well as standard bevel gears. They also offer black oxide and ground bore and tooth surfaces. These gears can be used for many industrial and mechanical applications. They are available in moderate quantities from stock and in partial sizes upon request. There are also different sizes available for specialized applications.
Hypoid bevel gears
The advantages of using Hypoid bevel and helical gears are obvious. Their high speed, low noise, and long life make them ideal for use in motor vehicles. This type of gear is also becoming increasingly popular in the power transmission and motion control industries. Compared to standard bevel and helical gears, they have a higher capacity for torque and can handle high loads with less noise.
Geometrical dimensioning of bevel/hypoid bevel gears is essential to meet ANSI/AGMA/ISO standards. This article examines a few ways to dimension hypoid bevel and helical gears. First, it discusses the limitations of the common datum surface when dimensioning bevel/helical gear pairs. A straight line can’t be parallel to the flanks of both the gear and the pinion, which is necessary to determine “normal backlash.”
Second, hypoid and helical gears have the same angular pitch, which makes the manufacturing process easier. Hypoid bevel gears are usually made of two gears with equal angular pitches. Then, they are assembled to match one another. This reduces noise and vibration, and increases power density. It is recommended to follow the standard and avoid using gears that have mismatched angular pitches.
Third, hypoid and helical gears differ in the shape of the teeth. They are different from standard gears because the teeth are more elongated. They are similar in appearance to spiral bevel gears and worm gears, but differ in geometry. While helical gears are symmetrical, hypoid bevel gears are non-conical. As a result, they can produce higher gear ratios and torque.
Crown bevel gears
The geometrical design of bevel gears is extremely complex. The relative contact position and flank form deviations affect both the paired gear geometry and the tooth bearing. In addition, paired gears are also subject to process-linked deviations that affect the tooth bearing and backlash. These characteristics require the use of narrow tolerance fields to avoid quality issues and production costs. The relative position of a miter gear depends on the operating parameters, such as the load and speed.
When selecting a crown bevel gear for a miter-gear system, it is important to choose one with the right tooth shape. The teeth of a crown-bevel gear can differ greatly in shape. The radial pitch and diametral pitch cone angles are the most common. The tooth cone angle, or “zerol” angle, is the other important parameter. Crown bevel gears have a wide range of tooth pitches, from flat to spiral.
Crown bevel gears for miter gear are made of high-quality materials. In addition to metal, they can be made of plastic or pre-hardened alloys. The latter are preferred as the material is less expensive and more flexible than steel. Furthermore, crown bevel gears for miter gears are extremely durable, and can withstand extreme conditions. They are often used to replace existing gears that are damaged or worn.
When selecting a crown bevel gear for a miter gear, it is important to know how they relate to each other. This is because the crown bevel gears have a 1:1 speed ratio with a pinion. The same is true for miter gears. When comparing crown bevel gears for miter gears, be sure to understand the radii of the pinion and the ring on the pinion.
Shaft angle requirements for miter gears
Miter gears are used to transmit motion between intersecting shafts at a right angle. Their tooth profile is shaped like the mitre hat worn by a Catholic bishop. Their pitch and number of teeth are also identical. Shaft angle requirements vary depending on the type of application. If the application is for power transmission, miter gears are often used in a differential arrangement. If you’re installing miter gears for power transmission, you should know the mounting angle requirements.
Shaft angle requirements for miter gears vary by design. The most common arrangement is perpendicular, but the axes can be angled to almost any angle. Miter gears are also known for their high precision and high strength. Their helix angles are less than ten degrees. Because the shaft angle requirements for miter gears vary, you should know which type of shaft angle you require before ordering.
To determine the right pitch cone angle, first determine the shaft of the gear you’re designing. This angle is called the pitch cone angle. The angle should be at least 90 degrees for the gear and the pinion. The shaft bearings must also be capable of bearing significant forces. Miter gears must be supported by bearings that can withstand significant forces. Shaft angle requirements for miter gears vary from application to application.
For industrial use, miter gears are usually made of plain carbon steel or alloy steel. Some materials are more durable than others and can withstand higher speeds. For commercial use, noise limitations may be important. The gears may be exposed to harsh environments or heavy machine loads. Some types of gears function with teeth missing. But be sure to know the shaft angle requirements for miter gears before you order one.
editor by CX
2023-04-17